News

(05/12/16) Site Updates!

Read more ...

Contact Me!

Comments, Questions or Site Suggestions? Fill out your contact information and the Captcha below
Email:
Subject:
Message:
How many eyes does a typical person have?



PART 2:  REPLACING THE BUTTONS


Remove the button panel from the housing, and lay it down back side up. Remove the 4 screws on the bottom panel


20161101 220750

 

You will be met with the PCB for the push buttons. Each button is soldered in place, so you will need to desolder each button.

 

20161101 220927


After all buttons are desoldered, remove the 3 gold screws on the button PCB (not the small section)


20161102 085853



Flip the button panel back over face up, and remove the 4 screws on the metal top plate and lift the entire plate out

The buttons will be attached (notch style) into the top plate



20161102 085937


To remove the buttons, you simply twist each one 1/4 of a turn (or into it begins to drop) and pop them all out

 

20161102 090231


Comments   

Esperanza
0 #3 Esperanza 2017-05-15 23:27
Precisely what I was looking for, thanks for posting.
Quote
SGESagat
0 #2 SGESagat 2017-04-03 15:44
Same issue as the other person whom commented. Thanks.
Quote
nebreus
0 #1 nebreus 2017-01-14 00:42
every post i saw trying to find out about this was impossible to follow n no pics this is good just signed up to say thanks
Quote

Add comment


Security code
Refresh