News

(05/12/16) Site Updates!

Read more ...

Contact Me!

Comments, Questions or Site Suggestions? Fill out your contact information and the Captcha below
Email:
Subject:
Message:
How many eyes does a typical person have?


Joystick Preperation 


20161101 134702



IMPORTANT:  WEAR SAFETY GLASSES WITH THIS STEP  --  THE PLASTIC STANDS WILL FIRE AT YOU AT A HIGH SPEED WHEN CUTTING

You will need to cut 5 posts. Not just the 4 that the stock joystick was mounted to, but the 5th post to the right of the stick. This 5th post  will be in the way of your joystick wiring. The 5th post is 1 of 3 mounting posts for the USB board.

Leave the two posts at the back side of the unit where the board attaches. You can look at the next set of images first to verify what you must cut.

With whichever cutting tool you chose to use, get as close to the bottom of the posts as you can, and cut them lose. You may have to apply pressure on one side, then rotate your cutters and cut the other side the rest of the way.



20161101 134813



20161101 135159


With the posts cut, you can now use your cutting tool to cut away further at the remains of the mounting posts. Then file them down as flat as possible.


20161101 141324

Comments   

Esperanza
0 #3 Esperanza 2017-05-15 23:27
Precisely what I was looking for, thanks for posting.
Quote
SGESagat
0 #2 SGESagat 2017-04-03 15:44
Same issue as the other person whom commented. Thanks.
Quote
nebreus
0 #1 nebreus 2017-01-14 00:42
every post i saw trying to find out about this was impossible to follow n no pics this is good just signed up to say thanks
Quote

Add comment


Security code
Refresh